HHS--Heat shrinkable closed sleeves
505----- -Roll Width (as supplied)
Ø711----Joint or pipeline Diameter
Note: The Size can be ordered according to customers’ demand
Test standard Unit JNHT-80 Adhesive Softening point ASTM E28 ℃(℉) 135 (275) Lap shear @23℃ EN12068 N/cm2 450 Lap shear @23℃ EN12068 N/cm2 25 Backing Specific gravity ASTM D792 g/cm3 95 Tensile strength ASTM D638 MPa (psl) 28 Elongation ASTM D638 % 425 Hardness ASTM D2240 Shore D 55 Abrasion resistance ASTM D 1044 Mg 35 Volume resistance ASTM D257 Ohm-cm 1017 Dielectricvoltage breakdown ASTM D149 Kv/mm 30 Sleeves Impact EN12068 J >8 Indentation EN12068 mm 0.1 Peel adhesion ASTM D1000 N/cm 120 Peel adhesion EN12068 N/cm >140 Cathodic disbondment ASTM G8 Mm rad 3 Water absorption ASTM D 570 % 0.05 Low Temp.flexbility ASTM D2671-C ℃(℉) >-32(-26) Fully recovered T thickness Mm(mil) 1.9(77) Fully recovered L thickness Mm(mil) 2.4(96) Fully recovered S thickness Mm(mil) 3.0(121)
Product Categories : Heat Shrinkable Sleeves
JNHT 80 Heat shrink sleeves with closure patch
Heat shrinkable wrapped sleeves
JNHT 60 Heat shrink seeves
JNHT 80 heat shrink sleeves
Heat shrink sleeves for pipe joints
heat shrinkable tubular sleeves
closed type Heat shrink sleeves
Heat shrink wrap tape