The Xunda anti-corrosion tape T100, mechanical protection tape T200 is a multilayer system used for the corrosion protection of oil ,gas ,and water underground or aboveground steel pipeline. T100 &T200 consist of two layers, the butyl rubber adhesive laminated on the polyethylene film backing. The T100 can be used as inner tape, T200 can be used as outer tape.
Xunda liquid adhesive can be used as primer for this system. The liquid adhesive represent an anti-corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.
The anti-corrosion tape assures a high bond to the primed surface with excellent conformability. The mechanical protection tape achieves a complete bond to the anti-corrosion tape.
The system can be applied by hand or with a Wrapping machine.
System Features
Cold applied without special equipment.
Resistant to soil stress
Excellent adhesion to primed pipe and itself.
Can be applied over a wide temperature range.
Good conformability and consistent uniform thickness.
Compatible with common pipe coatings.
Excellent resistance to cathodic disbondment.
Long term in-ground performance
Meets ASTM D 1000 、EN 12068、AWWA C214、C209 、DIN 30672 and other international standards.
Anti-corrosion Tape T100 Mechanical Protection Tape T200 | |||||||
| T150 | T164 | T176 | T250 | T276 | T238 |
|
Backing | 0.25mm | 0.24mm | 0.30mm | 0.25mm | 0.45mm | 0.20mm |
|
Adhesive | 0.25mm | 0.40mm | 0.46mm | 0.25mm | 0.20mm | 0.18mm |
|
Tape thickness | 0.38mm、 0.5mm 、0.64mm 、0.76mm |
| |||||
Width | 50mm,100mm,150mm,200mm,300mm, |
| |||||
Length | 30m、60m、120m、180m、240m、300M or others |
| |||||
Color |
| Black , Yellow ,White or others |
|
Product properties | Test method | Typical Value Typical Vale |
Tensile Strength | ASTM D1000 | 52N/cm 90N/cm |
Elongation | ASTM D1000 | >300% >400% |
Peel Adhesion to Primed Steel | ASTM D1000 | 33N/cm |
Cathodic Disbondment | ASTM G8 | 6.4mm |
Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 |
Water Absorptivity | ASTM D570 | 0.02% |
Volume Resistivity | ASTM D257 | 2.5 X 1015 ohm·cm |
Dielectric Strength | ASTM D149 | 40KV |
Impact Resistance | ASTM G-14 | 5.5Nm |
penetration resistance | ASTM G-17 | <15% |
Temperature Range For Application For Service |
| 5℃ -50℃ -34℃ - 85℃ |
Looking for ideal inner wrapping tape Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 0.51mm inner tape are quality guaranteed. We are China Origin Factory of 0.5mm Polyethylene Tape. If you have any question, please feel free to contact us.
Product Categories : PE tape T100
Polyethylene Anticorrosion Tape (XUNDA T100)
Polyethylene Backing Tape for Underground Pipeline
25 mils thickness black self-adhesive corrosion tape
PE inner tape for gas underground pipeline
black colour strong flex rubberized anti corrosion inner tape
0.51mm thickness polyethylene inner wrapping tape
0.76mm black inner wrap tape
0.64mm thickness polyethylene inner wrapping tape